before purchasing a laminating machine, we should first understand what kind of laminating machine we need: automatic laminating machine semi-automatic laminating machine manual laminating machine after selecting the right machine.
With time, my country's economic level is constantly improving, and the comprehensive national strength is also gradually increasing. This has also promoted the continuous improvement of people's living standards in our country. People no longer only pay attention to food and clothing. People's consumption level and consumption concept are also constantly improving along with the strength of the country, which also drives the corresponding The production of many industries has forced them to expand the scale of production and improve production efficiency. In particular, the development of the food industry, daily chemicals, medicine, and other industries that are closely related to the people's livelihood industry has to improve the performance requirements of the laminating machine, again and again, to keep up with the market changes. The laminating machine can no longer meet the production needs of some large enterprises, so the introduction of new laminating machines is imperative for large enterprises.
The mode is SWFM-560C. It's a heavy-duty computer-controlled laminating machine with an auto cut. The machine parameters are as follows. The max paper size is 560mm. Furthermore, the operating speed is 0-20m/min. Moreover, the laminating temperature is 30~160℃ and the total power is 10kw. Lastly, the dimensions(L×W×H) are 2.7×1.44×1.4m.
The model is SWFM520G. It's a sizeable hydraulic auto-cut laminating machine with oil heating, pulling off and embossing. The max paper size is 500mm, and the operating speed is 0-25m/min. Furthermore, the laminating temperature is 80-125℃. Besides, the total power is 4kW, and the dimensions(L×W×H) are 1.9×0.9×1.65m. The pressure is 3~6MPa. Lastly, the maximum height of paper is 12cm
Post-press processing includes two parts; one is the post-press processing of books and periodicals, mainly the binding work of various books and magazines; the other is the surface finishing of the printed products, mainly including lamination, glazing, die-cutting, indentation, hot stamping, embossing, and other technical processes and equipment.
The model is SWFM520F. It's a sizeable hydraulic auto-cut laminating machine with oil heating, pulling off and embossing. The max paper size is 485mm, and the operating speed is 0-25m/min. Furthermore, the laminating temperature is 50-120℃. Besides, the total power is 4kW, and the dimensions(L×W×H) are 2.1×0.87×1.6m. At last, the pressure is 3~6MPa.
SWFM720A , similar to SWFM520A , It's a sizeable hydraulic roll laminating machine with oil heating and slitting. But its max paper size is 685mm, more significant than 520A , and the operating speed is 0-25m/min. Furthermore, the laminating temperature is 50-120℃. Besides, the total power is 4kW, and the dimensions(L×W×H) are 1.38×1.1×1.4m. lastly, the pressure is 3~8MPa.
What is function of laminating?
Laminating the surface of digital prints, printing a large area and then laminating will help to protect the photos during post-press processing, cutting or packaging. One-sided lamination of double-sided prints is not necessarily beneficial because the uncoated side may be more likely to peel off the printing colour due to friction in subsequent processing.
